Factory Five Racing Website

Folio / Slidehow

Project 818 1Project 818 2Project 818 3Project 818 4Project 818 5Project 818 6Project 818 7

Main Content

818S, 818R, & 818C - What You Need

The key to the 818 being completed for under $15,000 is to use as many parts from the donor car as possible. The parts needed from a 2002-2007 Subaru Impreza/WRX sedan or wagon (except STI models*) include the following:

• Front spindles with full brakes and front lower control arms
• Rear spindles with brakes and E-brake handle/cables
• Steering rack, tie rod ends, and upper steering column assembly
• Pedal box and throttle pedal
• Master cylinder and brake booster, and clutch master cylinder
• Engine with turbo and intercooler (if WRX model)
• Exhaust manifolds, O2 sensors, and down tube
• Transmission
• Rear lower control arms, toe links, and CV joints
• Front seats, front seat belts, and gauge pod
• Fuel pump and fuel level assemblies
• Radiator and fan
• Wheels and tires
• Door hinges, rear with latches, strikers, and inside door handles
• Side view mirrors, left and right
• Rear view mirror
• Rear seat belts

*You can use a 2004-2007 Subaru STI as a donor car for your 818 build including the engine, but not as a single donor car build. The following parts will need to be sourced from an Impreza/WRX:

• Front spindles and hubs
• Rear spindles and hubs
• CV Axles
• Transmission (Pre-2006 STI transmissions will not work with the 2 wheel drive adapter)
• Wiring harness