Where to buy "deleted Parts" in Canada

 

The following parts have been removed from all kits destined for Canada and must be sourced separately.  In order to make these parts easier to procure we are giving a detailed description of each piece and where they would be easiest to locate.

 

Hardware
All of the hardware removed from the kit is SAE (not metric) and should be easy to find at a local hardware store. 

 

The bolts, nuts, and washers hold the fuel tank straps to the chassis at the back of the tank.  The self tapping screws that are provided with the fuel line and brake line assemblies may be replaced with 3/16” rivets from the secondary body fasteners, they hold the line clamps to the frame. The chair leg glides are to cap the frame tube ends where the fuel tank will mount.

 

2 Bolts:  3/8-16x2” socket head screw

2 Nuts:   3/8-16 nylon lock nut

4 Washers:  3/8 std. washer

4 Chair leg glides:  ¾” square

 

Standard Auto Parts:
All brake and fuel lines removed from the kit are standard off the shelf pieces that may be purchased from the local auto parts store.

 

5 Hose Clamps:  ¼” fuel line high pressure

5 Hose Clamps:  5/16” fuel line high pressure

2 Hose Clamps:  2-1/2” diameter

2 Feet: High Pressure fuel injection hose: ¼” inner diameter

2 Feet: High Pressure fuel injection hose: 5/16” inner diameter

1 Foot: Fuel hose: 2” inner diameter or 1” diameter with 4.6 engine

2 Brake Lines: 3/16” outer diameter, 60 inches long pre-flared

1 Brake Line: 3/16” outer diameter, 51 inches long pre-flared

1 Brake Line: 3/16” outer diameter, 20 inches long pre-flared

1 Brake union: 3/16” female to female

25 Feet: steel fuel line ¼” outer diameter

25 Feet: steel fuel line 5/16” outer diameter

2 Ball joints: Threaded ball joint reference # Moog K772

 

Specific Parts:
The Bilstein coil-over shocks that were removed from the kit are not available off the shelf.  The Pro-Shock front coil-overs that were used successfully for 4 years are available at www.proshocks.com .

 

The parts required from pro would be:

2 Front shocks part # ASB 5-46

2 front springs part # 10/450

2 Coil over Kits for 2-1/2” springs part # C335